If you are looking for China golden supplier and China good supplier polyken pipe protection tape, good quality and high quality polyken pipe protection tape, please feel free to contact Jining Qiangke Pipe Anticorrosion Materials Co.,Ltd.
System Description
The polyken pipe protection tape is a kind of tape anti corrosion material formed by extruding polyethylene base membrane and one butyl rubber adhesive layer that is covered thermally on the former. So it possesses good insulation, excellent anti corrosive effect, high mechanical strength, collision resistance, aging resistance, small water absorption, convenient construction, safety& health, wide application and long lifetime etc. Polyethylene anti corrosion adhesive tape can be used extensively in metal pipes of all pipelines and facilities in petroleum, natural gas, petrochemical industry, electric power, metallurgy, urban gas pipeline network and water supply etc. For efficient and long lasting outer anti corrosion.
Features
-Resistant to soil stress - Excellent adhesion to pipe and self -Low cathodic protection -Long-term in-ground performance - Serve for low-high temperatures |
- Cold applied -Uniform coating thickness -Compatible with all pipe diameters and generic plant coating systems -Qualified ASTM D1000,AWWA C 214,EN 12068 standards |
1, high bond strength, strong tensile strength, good flexibility, good elongation
2, for the interface deformation and cracking adaptability
3, with excellent chemical resistance, weather resistance and corrosion resistance
4, adhesion, waterproof, sealing, low temperature resistance is good
5, good dimensional stability
6, the construction process is simple
7, without any solvents, safety and environmental protection
Product use
1, the new building roof waterproof, underground waterproof, waterproof construction joints and polymer waterproof membrane sealed.
2, municipal engineering construction of the subway tunnel construction sealed waterproofing treatment.
3, color pressure plate joints in the airtight, waterproof, shock and so on. In the sun board engineering joints, sealed, waterproof, shock absorption.
4, car assembly sealant
5, steel structure joints in the construction of waterproof sealing treatment
6, composite aluminum foil butyl tape for a variety of civilian roof, Caigang, steel, waterproof membrane, pc board and other waterproof seal in the sun
Structure
Backing : Special blend of stabilized polyethylene | |
Adhesive : Butyl rubber and Adhesion Promoting Resins |
|
Color: Black |
Properties
Product Properties |
Test method |
Typical Value |
|||
POLYKEN980-15 |
POLYKEN980-20 |
POLYKEN980-25 |
POLYKEN980-30 |
||
Total Thickness |
15mil(0.381mm) |
20mil(0.508mm) |
25mil(0.635mm) |
30mil(0.762mm) |
|
Backing of PE film |
9 mils(0.229 mm) |
12mil(0.305mm) |
13mil(0.330mm) |
10mil(0.254mm) |
|
Butyl Rubber Adhesive |
6 mils(0.152 mm) |
8mil(0.203mm) |
12mil(0.305mm) |
20mil(0.508mm) |
|
Tensile Strength |
ASTM D1000 |
40 N/cm |
55 N/cm |
62 N/cm |
70 N/cm |
Elongation |
ASTM D1000 |
300% |
330% |
350% |
400% |
Peel Adhesion to Primed Steel |
ASTM D1000 |
24.5 N/cm |
25 N/cm |
26.5 N/cm |
30 N/cm |
Water Vapor Transmission Rate |
ASTM E 96 |
0.10g/m2 |
0.10g/m2 |
0.09g/m2 |
0.08g/m2 |
Water absorption after 1 day,At+23℃ |
ASTM D570 |
0.10% |
0.10% |
0. 08% |
0. 06% |
Volume Resistivity |
ASTM D 257 |
2.0 x 1015 ohm.cm |
2.5 x 1015 ohm.cm |
2.5 x 1015 ohm.cm |
|
Dielectric Strength |
ASTM D149 |
30 kV |
35 kV |
42kv |
43kv |
Ordering Information
POLYKEN 980 and 955 tape coatings are in roll form.
Eg.: POLYKEN980-20 BLK 6"×400'
POLYKEN 980 |
Product Model No. |
Standard ordering options |
20 |
Total tape thickness in mils |
15mils(0.381mm),20mils(0.508mm),25mils(0.635mm),30mils(0.762mm) |
BLK |
Tape backing color |
Black (BLK) |
6 |
Tape width in inches |
2"(50mm),,4"(100mm),6"(150mm),9"(228mm),12"(305mm)18" (457mm) |
400 |
Tape roll length in feet |
100ft(30M),200ft(61M),400ft(122M),600ft(183M),800ft(244M) |